No. | Brand | b | e | H | D | F | d | S | A |
CR-1-1/4-X-SS | SMITH | - | - | - | - | - | - | - | - |
CR-5/8-XBC | SMITH | - | - | - | - | - | 20 mm | 12.7 mm | - |
MCRV-80-C | SMITH | - | - | - | - | - | 60.32 mm | 25.4 mm | - |
YAG-64 | SMITH | - | - | - | - | - | - | - | - |
BCR-1-1/2-X | SMITH | - | - | - | - | - | - | - | - |
BCR-5/8-XBC | SMITH | - | - | 65 mm | - | - | 12.7 mm | - | 25 mm |
MCRV-13-SC | SMITH | - | - | - | - | - | - | - | - |
MCRV-90-C | SMITH | - | - | - | - | - | - | - | - |
MCRV-52-SB | SMITH | - | - | - | - | - | - | - | - |
DYR-2-1/4 | SMITH | - | - | - | - | - | - | - | - |
BCR-1-1/4-BC | SMITH | - | 0.31 | - | 62 mm | - | 30 mm | - | - |
PYR-3 | SMITH | 7 mm | 0.23 | - | - | - | - | - | - |
CR-3-XBC | SMITH | - | - | - | - | - | - | - | - |
FCR-2-3/4-E | SMITH | - | - | - | - | - | - | 10.9 mm | 49 mm |
CR-1-7/8-XC | SMITH | - | - | - | - | - | 60 mm | - | - |
MCRV-35-BC | SMITH | - | - | - | - | - | - | - | - |
MYR-6 | SMITH | - | - | - | - | - | - | - | - |
MYR-25-S | SMITH | - | - | - | - | - | - | - | - |
BCR-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
YR-7/8-XC | SMITH | - | - | - | - | - | - | - | - |
IRR-1-5/8 | SMITH | - | - | - | - | - | - | 6 mm | 30 mm |
MYRV-6-C | SMITH | 7.4 mm | 0.22 | - | - | - | - | - | - |
CR-3-1/4-XB | SMITH | - | - | 90 mm | - | - | 36.51 mm | 8.5 mm | - |
MPCR-85 | SMITH | - | - | - | - | - | 40 | - | - |
MYRV-5-S | SMITH | - | 22 mm | - | - | - | 41.28 mm | - | 38 mm |
HR-1/2-XC | SMITH | - | - | 180 mm | - | - | 30.16 mm | - | 32 mm |
SMITH MYRV-45 Cam Follower and Track Roller - Yoke Type | C:31.85 kN; Designation of bearing:UC209G2L4; Designation of housing:PA209N-; S:19 mm; J:90 mm; E:25 mm; T max.:100 °C; G:M6x1; d:45 mm; Recommended tightening torque for set screw:11.5 Nm; |
SMITH BCR-2-1/2-XC Cam Follower and Track Roller - Stud Type | S:7.5 mm; C:14 kN; Designation of housing:FC205N-; Designation of bearing:ES205G2T20; d:25 mm; Weight:1.03 kg; Recommended tightening torque for set screw:5.5 Nm; Dz:60 mm; Designation of open end cover:SCOE205-25; A:27 mm; |
SMITH CR-6-XB Cam Follower and Track Roller - Stud Type | f0:15.5; ra max:1 mm; Min operating temperature, Tmin:-20 °C; Nlim (grease):8,400 rpm; da min:55 mm; Characteristic cage frequency, FTF:0.43 Hz; Characteristic inner ring frequency, BPFI:7.94 Hz; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:0.75 kN; Static load, C0:16.6 kN; |
SMITH YR-2-SS Cam Follower and Track Roller - Yoke Type | H:90 mm; A3:2.5 mm; T max.:200 °C; d:25 mm; SW:3 mm; Designation of housing:C305-; Designation of bearing:UC305G2T20; C0:11.5 kN; S:15 mm; Recommended tightening torque for set screw:5.5 Nm; |
SMITH BCR-2-3/4-X Cam Follower and Track Roller - Stud Type | Mass:0.04 kg; Dynamic load, C:6.4 kN; Nlim (grease):12,000 rpm; Radial clearance class:CN; f0:14.7; D:37 mm; rs min:0.3 mm; Brand:NTN; Characteristic inner ring frequency, BPFI:6.42 Hz; Characteristic outer ring frequency, BPF0:4.58 Hz; |
SMITH MPYR-85 Cam Follower and Track Roller - Yoke Type | Rolling Element Material:Steel; B:18.25; Inner/Outer Ring Material:Steel; Raceway Ring Shape:Tapered Roller; d:35; Size Standards:Metric System; Revolution Frequency(rpm):5500; Specifications/Environment:Standard; |
SMITH MPYR-90 Cam Follower and Track Roller - Yoke Type | N:14mm; e:24 mm; C0:20.8 kN; L:137 mm; S:10.2 mm; Designation of closed end cover:SCC209; Z:58.4 mm; Dz:95 mm; A:40 mm; C:31.85 kN; |
SMITH YR-5-X Cam Follower and Track Roller - Yoke Type | N:14mm; d:35 mm; G:R1/8"; T max.:200 °C; A1:12.5 mm; B:25.4 mm; s1:30.2 mm; e:21 mm; S:9.5 mm; L:118 mm; |
SMITH MYRV-6-SC Cam Follower and Track Roller - Yoke Type | d:120; Number of Raceway Ring Rows:Double Row; Size Standards:Metric System; Series:ULTAGE type EM; Raceway Ring Shape:Self-aligning roller; Shaft Bore Config.:Tapered hole; Basic Load Rating, Dynamic Rating(N):485000; Load Direction:Radial; D:215; |
SMITH CR-1-3/4-X-SS Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Lateral Width L(mm):64; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; RoHS:6; Seals:ZZ (Double Shield); Number of Bearings:Single; Bearing Part Number:6903; C Chamfered:Not Provided; |
SMITH HR-3-C Cam Follower and Track Roller - Stud Type | Housing Material:304 Stainless Steel; Bearing Retained:Yes (with retaining; Bearing Material:Stainless Steel; Seals:DD (Contact Rubber S; Shape:Flange Type; Number of Bearings:Single; Width T(mm):10; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; |
SMITH YR-2-3/4-C Cam Follower and Track Roller - Yoke Type | Bearing Part Number:6800; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange O.D. H(φ):41; Number of Bearings:Double; Days to Ship:7 Days; Volume Discount:Available; |
SMITH YR-1-1/4-X-SS Cam Follower and Track Roller - Yoke Type | Max. Allowed rpm(rpm):6800; Inner/Outer Ring Material:Steel; Precision:Grade 4; Type:Angular Contact Ball; Contact angle symbol:C; Days to Ship:Quote; Outer Ring Shape:Flat; Size Standards:Metric System; D:80; Load Direction:Radial; |
SMITH BYR-1-X Cam Follower and Track Roller - Yoke Type | Bearing Material:[Steel] Steel; Bearing Retained:No; Width T(mm):35 ~ 50; Number of Bearings:Double; Days to Ship:7 Days; Flange O.D. H(φ):50; Bearing Part Number:6901; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; |
SMITH MCRV-40-C Cam Follower and Track Roller - Stud Type | Min operating temperature, Tmin:-20 °C; G1:25 mm; Characteristic rolling element frequency, BSF:12.92 Hz; F:30 mm; Dw:2.5 mm; Characteristic inner ring frequency, BPFI:14 Hz; B2:49.5 mm; D:62 mm; C:29 mm; Maximum tightening torque:178 Nm; |
SMITH MCR-90-SBC Cam Follower and Track Roller - Stud Type | L:205 mm; G:M6x1; C:57.2 kN; Weight:6.21 kg; d:63.5 mm; H3:145; T max.:200 °C; Designation of bearing:EX213-40G2T20; B1:85.7 mm; A2:67.6 mm; |
SMITH YR-1-7/8-XC Cam Follower and Track Roller - Yoke Type Video