| No. | Brand | E | N | Z | J | B | C | H | m |
| NJ212-E-TVP2-C3 | FAG | - | - | 70.3 mm | 150 mm | 41.2 mm | - | - | - |
| 7205-B-TVP-P5-UA | FAG | - | 14mm | - | 126 mm | 42.9 mm | 25.7 kN | 47.6 mm | - |
| 638/3 | FAG | - | - | - | - | - | - | - | - |
| 53324-MP | FAG | - | 14mm | - | - | - | - | - | - |
| 7207-B-TVP | FAG | - | - | 64.4 mm | 184 mm | - | - | - | - |
| 1311-TVH-C3 | FAG | - | - | - | - | - | - | - | - |
| 22216-E1 | FAG | - | - | - | - | - | - | - | - |
| B7217-C-T-P4S-DUL | FAG | - | 25mm | - | 250 mm | 71 mm | 81.6 kN | - | - |
| NJ326-E-M1 | FAG | - | - | - | - | - | - | - | - |
| 6306-2Z | FAG | - | - | - | - | 16 mm | - | - | - |
| NJ206-E-TVP2 | FAG | - | 17mm | - | - | - | - | - | - |
| HC7019-C-T-P4S-UL | FAG | - | - | - | - | 16 mm | - | - | - |
| 23028-E1A-K-M-C3 | FAG | - | - | - | - | - | - | - | - |
| 6201-P6 | FAG | - | - | 68.6 mm | - | - | - | - | - |
| 6236-MA-C3 | FAG | - | - | - | - | - | - | - | - |
| NUP311-E-TVP2 | FAG | - | 11,5mm | - | - | 34 mm | - | - | - |
| QJ216-N2-MPA-C4-F59 | FAG | - | - | - | - | - | - | - | - |
| B7008-C-2RSD-T-P4S-DUM | FAG | - | - | - | - | - | 19.05 mm | - | - |
| 6020-C2 | FAG | - | - | - | 100 mm | 48 mm | 33.5 kN | - | - |
| 23992-B-MB-C3 | FAG | - | - | - | - | 35 mm | - | - | - |
| FAG 23028-E1A-K-M-C3 Spherical Roller Bearings | Weight:3.61 kg; Designation of housing:C213-; s1:57.6 mm; d:63.5 mm; SW:4.76 mm; A5:34.1 mm; C0:40 kN; G:M6x1; A:40 mm; T max.:100 °C; |
| FAG 6001-2Z-C3 Single Row Ball Bearings | N2:32 mm; B:34 mm; A2:24 mm; T max.:200 °C; C0:7.88 kN; N:19mm; d:25.4 mm; L2:10 mm; Designation of bearing:UC205-16G2T20; Weight:0.8 kg; |
| FAG 6308-2RSR-C2 Single Row Ball Bearings | d:15 mm; C0:4.78 kN; T min.:-40 °C; Designation of bearing:US202G2T04; E:9 mm; T max.:100 °C; Designation of housing:PA203N-; A1:19 mm; L1:20 mm; B:22 mm; |
| 220 mm x 460 mm x 145 mm FAG 22344-K-MB Spherical Roller Bearings | B:34 mm; J:70 mm; T max.:100 °C; A:27 mm; L:95 mm; T min.:-20 °C; S:14.3 mm; s1:17 mm; A2:35.7 mm; N:12mm; Size (mm):220 mm x 460 mm x 145 mm ; |
| FAG 22312-E1-C3 Spherical Roller Bearings | S:25.4 mm; H:69.9 mm; d:60 mm; s1:32.55 mm; Weight:4.27 kg; Designation of open end cover:SCO212-60; Designation of housing:PAE212N-; B:65.1 mm; C:52.5 kN; H1:16 mm; |
| FAG B71911-C-2RSD-T-P4S-UL Precision Ball Bearings | e:28 mm; G:R1/8"; A1:15 mm; A:45.8 mm; C:43.55 kN; s1:22.65 mm; L:134 mm; N:18mm; S:11.8 mm; H:222 mm; |
| FAG 51148-MP Thrust Ball Bearing | N:11,5mm; A2:42.4 mm; B1:30.9 mm; Recommended tightening torque for set screw:5.5 Nm; e:19 mm; T max.:100 °C; L:95 mm; C:14 kN; d1:37.4 mm; A:30 mm; |
| FAG 7360-B-MP Angular Contact Ball Bearings | Recommended tightening torque for set screw:8 Nm; C:35.1 kN; C0:23.2 kN; G:M6x1; L1:90 mm; L3:86 mm; H2:83 mm; T min.:-40 °C; P:300 mm; N:29mm; |
| FAG 222S-407-MA Spherical Roller Bearings | d:15 mm; Characteristic rolling element frequency, BSF:4.73 Hz; Weight / Kilogram:0.025; Harmonized Tariff Code:8482.10.50.68; Bore:0.591 Inch | 15 Mill; Inch - Metric:Metric; Inner Race Width:0 Inch | 0 Millimete; UNSPSC:31171504; Characteristic outer ring frequency, BPF0:3.59 Hz; Other Features:Deep Groove | Radial; |
| FAG 52322-FP Thrust Ball Bearing | da min:53 mm; Nlim (grease):7,000 rpm; rs min:1.5 mm; D3 max:96.8 mm; Max operating temperature, Tmax:120 °C; B:25 mm; rNs min:0.5 mm; b min:2.7 mm; Characteristic outer ring frequency, BPF0:3.06 Hz; Ca max:5.74 mm; |
| FAG 54410 Thrust Ball Bearing | T min.:-20 °C; Recommended tightening torque for set screw:33.9 Nm; S:39.7 mm; Weight:4.56 kg; T max.:100 °C; A5:56.3 mm; Designation of bearing:UC218-56G2; C:96 kN; s1:48 mm; B:96 mm; |
| FAG 7209-B-JP-UA Angular Contact Ball Bearings | T min.:-20 °C; G:R1/8"; A1:25 mm; d:28.58 mm; s1:19.05 mm; Designation of housing:PAE206-; L1:22 mm; S:15.9 mm; B:38.1 mm; N:M10; |
| 80 mm x 140 mm x 33 mm FAG 22216-E1 Spherical Roller Bearings | Dynamic load, C:51.6 kN; f0:14.3; D:110 mm; D1:97.6 mm; ra max:1.5 mm; Mass:0.78 kg; Fatigue limit load, Cu:1.64 kN; Nlim:9,800 rpm; Max operating temperature, Tmax:120 °C; Radial clearance class:CN; Size (mm):80 mm x 140 mm x 33 mm ; |
| FAG 6308-2RSR-S1-L077 Single Row Ball Bearings | T max.:100 °C; T min.:-40 °C; s1:15.5 mm; S:12.7 mm; N:M8; Designation of housing:PAE204N-; A1:19 mm; J:50.8 mm; L1:18 mm; Designation of bearing:UC204G2T04; |
| FAG 6403-2RSR-C3 Single Row Ball Bearings | SW:4 mm; B:41.2 mm; Weight:3.82 kg; Recommended tightening torque for set screw:11.5 Nm; H2:61 mm; T max.:100 °C; L:320 mm; G:R1/8"; H:120 mm; Dz:95 mm; |
| 300 mm x 420 mm x 90 mm FAG 23960-B-MB Spherical Roller Bearings | H:155 mm; A1:12.5 mm; Weight:1.23 kg; Designation of bearing:UC207-20G2; C0:15.2 kN; C:25.7 kN; Designation of housing:FLE207-; e:20 mm; B:42.9 mm; A2:45.4 mm; Size (mm):300 mm x 420 mm x 90 mm ; |
85 mm x 150 mm x 28 mm FAG 30217-A Tapered Roller Bearing Assemblies Video
FAG 30217-A tapered roller bearings - Nodes bearing
FAG 30217-A bearing, tapered roller bearings, Dimensions: 85mm x 150mm x 30.5mm, Cr: 178000N, C0r: 224000N, Limiting Speeds:4850 1/min
Bearing 30217-A (FAG) | Size and Specification | Bearings
Tapered roller bearings 30217-A. Bearing number : 30217-A. Size (mm) : 85x150x30.5. Brand : FAG. Bore Diameter (mm) : 85. Outer Diameter (mm) : 150
FAG 30217A Tapered Roller Bearing Cone and Cup Set
FAG 30217A Tapered Roller Bearing Cone and Cup Set, Standard Tolerance, Metric, 85 mm ID, 150mm OD, 30.5mm Width, Maximum Rotational Speed:
FAG (Schaeffler) - 30217-A - Motion Industries
FAG (Schaeffler) 30217-A. Tapered Roller Bearing Full Assembly - 85 mm Bore, 150 mm OD, 28 mm Cone Width, 24 mm Cup Width, Class 3 Precision Rating
Tapered roller bearings - 30217-A - medias - Schaeffler
Tapered roller bearings 30217-A, main dimensions to DIN ISO 355 / DIN 720. Radial load Axial load in one direction Not sealed Grease lubrication Oil
30217-A FAG • ABF Store
30217-A FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8 languages